7
Lot
7
DESC: Kurt J Lesker Company E Beam Evaporation Hi Vacuum Metal Oxide Deposition System, requires 6 Bar Compressed Air Supply (1-7) Kurt J Lesker Company E Beam Evaporation Hi Vacuum Metal Oxide Depositor This Hi Vacuum Metal Oxide Deposition Machine, is fitted with a 500 mm diameter x 1000 mm high Deposition Chamber, for using either E Beam, or Thermal Evaporation at temperatures between 600 to 1800 degrees Celsius, and at a 10-7 Torr Vacuum to deposit Metal Oxide or Organic Coatings onto either 8" diameter Wafers, or 4 x 2" diameter Wafers. The Chamber is fitted with a side mounted Cryo-Torr High Vacuum Pump Please Note; The inside of the Chamber is currently contaminated with Nickel Oxides and Organic compounds.(2-7) Pre Vacuum Substrate Loading Chamber(3-7) Main Automatic System Control Panel(4-7) Vacuum Rough Pump(5-7) Centrifugal Water Pump(6-7) Power Transformer(7-7) Helium Chiller Unit, mounted in upstairs Plant Room / mdl: E Beam / EquipNet.com Listing ID: 610864 / Loc: Unit 2, Waterton Industrial Estate, Bridgend, Wales, CF31 3TR5 / Hanlding Fee. This Charge will appear on your final invoice: 0.00 GBP / Dims - L: 4650MM / x W: 1400MM / x H: 2500MM / x Ht: 1750KGS
For More Detailed Listing Information and to Learn more, please follow this link: https://www.equipnet.com/auctions/merck-electronic-manufacturing/1109/
*Handling Fees - are noted in the description of each listing. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). This cost will be added to you final invoice. Packaging and Shipping are additional and can be provided by Logistics once your equipment invoice has been paid
Invoices will be sent via email, and you can view them in your MyEquipNet account (https://www.equipnet.com/myequipnet/).
If you are new to EquipNet, an account will be created for you and the username and password will be sent.
If you have an EquipNet account, be sure the Bidspotter information is the same or a new account will be created.
=========================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
EquipNet Auctions Terms and Conditions:
All auction registrants are required to be an EquipNet, Inc. member and have electronically agreed to the standard member terms and the specific member terms for buyers. Buyers who sign up for this event will have accounts created as agreeing to register. Bids submitted by non-EquipNet, Inc. members may be deemed invalid.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
DESC: Kurt J Lesker Company E Beam Evaporation Hi Vacuum Metal Oxide Deposition System, requires 6 Bar Compressed Air Supply (1-7) Kurt J Lesker Company E Beam Evaporation Hi Vacuum Metal Oxide Depositor This Hi Vacuum Metal Oxide Deposition Machine, is fitted with a 500 mm diameter x 1000 mm high Deposition Chamber, for using either E Beam, or Thermal Evaporation at temperatures between 600 to 1800 degrees Celsius, and at a 10-7 Torr Vacuum to deposit Metal Oxide or Organic Coatings onto either 8" diameter Wafers, or 4 x 2" diameter Wafers. The Chamber is fitted with a side mounted Cryo-Torr High Vacuum Pump Please Note; The inside of the Chamber is currently contaminated with Nickel Oxides and Organic compounds.(2-7) Pre Vacuum Substrate Loading Chamber(3-7) Main Automatic System Control Panel(4-7) Vacuum Rough Pump(5-7) Centrifugal Water Pump(6-7) Power Transformer(7-7) Helium Chiller Unit, mounted in upstairs Plant Room / mdl: E Beam / EquipNet.com Listing ID: 610864 / Loc: Unit 2, Waterton Industrial Estate, Bridgend, Wales, CF31 3TR5 / Hanlding Fee. This Charge will appear on your final invoice: 0.00 GBP / Dims - L: 4650MM / x W: 1400MM / x H: 2500MM / x Ht: 1750KGS
General delivery information available from the auctioneer
For More Detailed Listing Information and to Learn more, please follow this link: https://www.equipnet.com/auctions/merck-electronic-manufacturing/1109/
*Handling Fees - are noted in the description of each listing. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). This cost will be added to you final invoice. Packaging and Shipping are additional and can be provided by Logistics once your equipment invoice has been paid
Invoices will be sent via email, and you can view them in your MyEquipNet account (https://www.equipnet.com/myequipnet/).
If you are new to EquipNet, an account will be created for you and the username and password will be sent.
If you have an EquipNet account, be sure the Bidspotter information is the same or a new account will be created.
=========================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
EquipNet Auctions Terms and Conditions:
All auction registrants are required to be an EquipNet, Inc. member and have electronically agreed to the standard member terms and the specific member terms for buyers. Buyers who sign up for this event will have accounts created as agreeing to register. Bids submitted by non-EquipNet, Inc. members may be deemed invalid.