SPECIAL OFFER - ONLY 12.5% BUYERS PREMIUM - NO INTERNET SURCHARGE. SAVING YOU 6% OVERVIEW OF EQUIPMENT IN THIS AUCTION. Complete contents of a Fre...

START OF THE GARLIC LINE. 2 x Garlic burner and bins. 2 burners Heating up to 80 degrees and goes into a splitter box and hot air heats the garlic...

1 x Garlic cracking line with flighted incline belt conveyor, with brushes and rotary drum for taking off the chaff, with suction system which rem...

1 x Dolav tipper with hydraulic pack. Tipping height approx. 2.5 m. Fully guarded with safety. Dimensions approx. 2.3 m x 1.8 m. Lift out: £150. (...

1 x S/s hopper with incline flighted belt conveyor going through the centre. Approx. dimensions: Height to top of hopper 2.5 m. Overall length 2.6...

1 x Platform steps. Dimensions approx. 1.4 m to top of the step, overall height 2.5 m. 1.1 m long x 900 mm wide. Lift out: £10. (This lot is being...

1 x Garlic peeler. With 8-pockets. On rotary drum. Requires compressed air supply to peel the garlic clove which then goes down onto brushed conve...

1 x S/s sorting conveyor with Neoprene belt. Belt width approx. 1 m. Overall length approx. 3.6 m. Including spares. Lift out: £50. (This lot is b...

1 x Watson and Brookman water bath with screw elevator. Tipping/exit height approx. 2.4 m. Overall length approx. 2.2 m x 1.2 m wide. With water r...

1 x Incline conveyor with hopper at the beginning. Approx. dimensions: Infeed height 400 mm. Belt width 600 mm. Distance between flights 300 mm. E...

1 x Watson and Brookman PD/009/900 garlic dipping wheel. With filtration. Approx. dimensions 900 mm dipping wheel, distance between each section i...

1 x Incline flighted belt conveyor with s/s hopper infeed. The infeed height is approx. 400 mm. Outfeed height is approx. 2.5 m. Length is approx....

1 x Sepamatic 2000VT. All s/s with s/s frame. With gantry and step ladder. Dimensions approx. 1.8 m x 2.1 m. Gantry size 1 m x 800 m. Height of st...

1 x Debris/waste take-off. Approx. 300 mm wide belt. Overall dimensions approx. 2.3 m long. Lift out: £15. (This lot is being offered individually...

1 x Incline conveyor approx. 300 mm infeed, 1.3 m outfeed. Overall dimensions approx. 2.5 m. Belt width approx. 300 mm. Mobile. Lift out: £15. (Th...

1 x Stephan Microcut filling station model MCH20FS. 2017. With Ceia THS metal detector 200 mm x 125 mm. With Avery Weigh-Tronix ZQ375 scale for 5 ...

1 x S/s sink approx. 1 m x 750 mm x 900 mm. Bowl size 900 mm x 600 mm x 400 mm deep. Lift out: £30. ...[more]

1 x Knee operated sink approx. 460 mm x 400 mm. With hand sanitiser and soap dispenser. Lift out: £30.

1 x S/s tote bin. Lift out: £10.

START OF GINGER LINE. 1 x Watson Brookman incline belt conveyor with s/s hopper at infeed. Infeed height approx. 300 mm. Exit height approx. 2 m. ...

1 x Nilma jacuzzi bath washer. Bath dimensions approx. 1.2 m x 600 mm x 700 mm. Lift out: £75. (This lot is being offered individually and as part...

1 x Hopper/elevator from Nilma to Comitrol. Mobile. With spray bar. Conveyor height approx. 1.1 m. Belt width 600 mm. Distance between flights 300...

1 x Urschel Comitrol 3600 (puree machine). Mobile. On s/s frame. Fully guarded. Dimensions approx. 600 mm x 1 m x height to top of hopper 1.7 m he...

1 x Stephan Microcut model MC12 with Ceia metal detector. Aperture size approx. 230 mm x 110 mm high. On s/s frame. With emptying nozzle. Overall ...

1 x Avery Weigh-Tronix ZQ375 scale with stand. Lift out: £10.

1 x S/s table approx. 600 mm x 600 mm. LIft out: £10.

1 x Star Universal bag sealer fixed to table. Sealing bar length 700 mm. Table size approx. 1 m x 600 mm. Also with this unit is a detachable tabl...

1 x S/s bag stand approx. 400 mm x 700 mm x 1.2 m high. Lift out: £10. ...[more]

1 x S/s table approx. 1 m x 600 mm. Lift out: £10.

1 x S/s bench approx. 1.2 m x 400 mm. Lift out: £10.

1 x S/s conveyor. (Taking buckets out of high care). Belt width 400 mm x 500 mm x 4.9 m long. Lift out: £50.

1 x Sanitising tunnel, belt driven. Approx. dimensions: 150 mm wide belts. Aperture dimensions approx. 400 mm x 400 mm. Overall dimensions 4.7 m l...

1 x S/s step approx. 400 mm x 300 mm x 150 mm high. Lift out: £5.

1 x S/s table with compartments below. Dimensions approx.1.5 m x 600 mm. Lift out: £10.

1 x S/s Back Saver ST Model BSM ST mobile bin tipper. 2019. Dimensions approx. 1m x 1.2 m. Lift out: £20.

1 x Single knee operated sink. Approx. 460 mm x 400 mm. Lift out: £30.

1 x S/s Wall mounted soap dispenser, paper towel dispenser, ppe dispenser. Lift out: £10.

1 x S/s bench approx. 900 mm x 400 mm and 3 x Overall/coat hook racks. Lift out: £10.

1 x Wall mounted boot holder, takes 10 pairs. 1 x S/s 6-shelf shoe cabinet/storage unit approx. 350 mm x 350 mm x 1.47 m high. Lift out: £20.

1 x S/s bench with shoe holder, takes 6-pairs boots. Approx. 1.5 m x 400 mm. Lift out: £10.

1 x Wall mounted s/s shoe holder, 6-shelf. Approx. 340 mm x 350 mm x 1.7 m high. Lift out: £10.

1 x Single knee operated sink approx. 460 mm x 400 mm. Lift out: £30.

1 x S/s Hygienox bank of 5-lockers. Approx. 400 mm x 460 mm x 1.9 m high. Lift out: £10.

1 x S/s single knee operated single approx. 460 mm x 400 mm. Lift out: £30.

1 x Various s/s PPE dispensers; 1 x s/s hand drier, 1 x towel dispenser, 1 x gloves/hair net/beard/snood dispenser. Lift out: £10.

1 x S/s table approx. 1.2 m x 480 mm. LIft out: £10.

1 x Palintest 7100 photometer with carrying case. Lift out: £5. ...[more]

START OF CARROT LINE. 1 x Tong and Peal potato box tipper. Approx. 2.5 m x 3 m with exit conveyor. Belt width 700 mm. Lift out: £200.  (This lot i...

1 x Flat Intralox belt conveyor approx. 3 m long. Belt width 400 mm. Distance between flights 400 mm. 1.6 m high. Lift out: £50. (This lot is bein...

1 x Carrot destoner. All s/s. Approx. 1.2 m x 1.9 m high x 2.8 m. Hopper size approx. 900 mm x 1.1 m x 900 mm deep. Lift out: £120. (This lot is b...

1 x Wyma carrot peeler on s/s frame. Approx. 3.7 m long x 1.7 m wide x 3.1 m high. With a dolav of new brushes. Lift out: £350. (This lot is being...

1 x Netszch scroll and stator pump. Lift out: £60. (This lot is being offered individually and as part of a combination lots 48-55 see lot 702. Th...

1 x Incline belt conveyor. Approx dimensions; Infeed height 400 mm. Belt width 400 mm. Distance between flights 200 mm x 3.5 m outfeed height. Lif...

1 x S/s conveyor approx. 7.5 m long. Flighted belt. Belt width 400 mm. Distance between flights 500 mm. LIft out: £120. (This lot is being offered...

1 x S/s inspection conveyor approx. 3.3 m long. With powered rollers 800 mm long. With waste bins. Waste outfeed conveyor runs underneath. With s/...

1 x Ceia incline conveyor 3.5 m long with 350 mm belt, infeed height 400 mm, outfeed height 1.6 m. Distance between flights 150 mm. With bag filli...

1 x Fam Centris System type 400. 2017. With incline conveyor attached to frame. Approx. dimensions 400 mm wide belt. Distance between belts 250 mm...

START OF POTATO LINE. 1 x Tong and Peal box tipper with hydraulic pack. Dimensions approx. 2.6 m x 2.7 m x 3 m high. LIft out: £300.  (This lot is...

1 x Tong and Peal buffer Neoprene belt conveyor. On s/s frame. Overall length approx. 3.5 m x width 2.4 m. Belt width approx. 1.8 m. Infeed height...

1 x Abrasive destoner all s/s. Overall dimensions approx. 1.7 m x 1.1 m. Outfeed height 2.5 m. Lift out: £150.  (This lot is being offered individ...