WARD CAPSTAN LATHE, BED LENGTH APPROXIMATELY 34" ...[more]

GORDON LAIRD, 3-PHASE, DISC AND BELT SANDER / LINISHER, DISC 12" DIAMETER, BELT 6" WIDTH ...[more]

PEDRAZZOLI, 3-PHASE, TABLE TOP, CIRCULAR, METAL CUTTING CHOP SAW, COMPLETE WITH WOODEN RACK ON FLOOR OF SPARE BLADES, AND STEEL 50" x 99" WORKBENC...

HYSTER, GAS-POWERED, FOUR WHEEL, COUNTER BALANCE FORKLIFT, MODEL H2.00XL, YEAR OF MANUFACTURE 1987, SERIAL NO. A177B21291H, 2000KG CAPACITY, 3,369...

ALEXANDER, TRIPLE 12, HORIZONTAL BAND SAW, COMPLETE WITH GREEN PAINTED FEED ROLLER ...[more]

WMW, QUAD VERTICAL PILLAR DRILL, WITH RISE-AND-FALL, T-SLOTTED TABLE, MODEL 12273-76, SERIAL NO. BKR254AI ...[more]

COLCHESTER TRIUMPH 2000, CENTRE LATHE, 51" BED, COMPLETE WITH FITTED 4-JAW CHUCK, GREY METAL SIDE TABLE WITH CHUCK JAWS, AND 3-JAW CHUCK ...[more]

HITACHI, 240V, BENCH TOP METAL CUTTING CHOP SAW, COMPLETE WITH 6' x 3', GREEN PAINTED METAL BENCH ...[more]

XYZ PROTURN SLX 42, CnC LATHE, WITH PROTO TRAK SLX CnC CONTROL, OVERALL BED LENGTH APPROXIMATELY 68", COMPLETE WITH TAIL STOCK, SERIAL NO. L542, Y...

**SPARE LOT**

ARCHDALE 4', RADIAL ARM DRILL, COMPLETE WITH T-SLOTTED DRILLING BOX, CLAMPS, 2x DRILL VICES, AND JETBRAKE ...[more]

ARCHDALE, FLOOR STANDING, VERTICAL PILLAR DRILL, COMPLETE WITH DRIV INJECTION BRAKE, T-SLOTTED RISE-AND-FALL TABLE, AND 6" DRILL VICE ...[more]

WARD TURRET LATHE, APPROXIMATELY 68" BED, COMPLETE WITH FITTED 3-JAW CHUCK, SPARE 4-JAW CHUCK, AND SPARE RIGHT-ANGLE TOOL ...[more]

WARD TURRET LATHE, APPROXIMATELY 63" BED, COMPLETE WITH COLLET CHUCK, AND 2x BLUE BINS OF PARTS ...[more]

HERBERT 2D, CAPSTAN LATHE, APPROXIMATELY 36" BED, COMPLETE WITH FITTED COLLET CHUCK ...[more]

WARD CAPSTAN LATHE, WITH FITTED COLLET CHUCK, BED APPROXIMATELY 28" ...[more]

GRANOR OF HALIFAX CENTRE LATHE, BED LENGTH APPROXIMATELY 114", COMPLETE WITH BOXES OF COLLETS ON BED, TAIL STOCK, LARGE 4-JAW CHUCK, SMALLER 3-JAW...

COLCHESTER MASCOT 1600, GAP BED CENTRE LATHE, BED LENGTH 103", COMPLETE WITH 3-JAW CHUCK, STEADY, AND TAIL STOCK ...[more]

DEAN SMITH & GRACE, 13x42 TYPE 13-1 LATHE, BED LENGTH APPROXIMATELY 5', SERIAL NO. 37452-7-68, COMPLETE WITH TAIL STOCK, AND COLLET CHUCK ...[mor...

WARD CAPSTAN LATHE, BED LENGTH APPROXIMATELY 45", COMPLETE WITH 3-JAW CHUCK ...[more]

ARBOGA MASKINER, FLOOR STANDING, VERTICAL PILLAR DRILL, WITH 20" x 16", T-SLOTTED, RISE-AND-FALL TABLE, COMPLETE WITH SMALL QUANTITY OF DRILL BITS...

QUALTERS & SMITH QDM750, BENCH MOUNTABLE, VERTICAL PILLAR DRILL, ON GREEN BENCH, COMPLETE WITH 17" x 2', T-SLOTTED TABLE, SERIAL NO. 20U15791 ......

PILOT, FLOOR STANDING, VERTICAL HYDRAULIC PRESS, 10½" THROAT, SERIAL NO. 730401 ...[more]

JONES & ATTWOOD, VERTICAL, MECHANICAL PRESS, SERIAL NO. 18D658 ...[more]

FLOOR STANDING, VERTICAL, MECHANICAL PRESS ...[more]

**SPARE LOT**

BRIDGEPORT, VERTICAL MILLING MACHINE, COMPLETE WITH TOPAZ DIGITAL READOUT, AND TUSCAN 6" MACHINE VICE, 9" x 44", T-SLOTTED TABLE ...[more]

TECNA, FLOOR STANDING, TREADLE-OPERATED, SPOT WELDER, YEAR OF MANUFACTURE 1989 ...[more]

SCR MODEL 30PM-10, PERMANENT MAGNET SCREW COMPRESSOR, SERIAL NO. SW847402, COMPLETE WITH COOL TECHNOLOGY, FLOOR STANDING, VERTICAL, AIR RECEIVER T...

DENCO MODEL MA5, BLUE CASED, FLOOR STANDING, AIR DRYER (TO BE DISCONNECTED FROM THE VERTICAL AIR RECEIVER TANK AT THE TOP OF THE DRYER, TO BE DISC...

EXCEL, VERTICAL MILLING MACHINE, MODEL PMTM2V, YEAR OF MANUFACTURE 1999, COMPLETE WITH NEWALL DIGITAL READOUT, AND 9" x 49", T-SLOTTED TABLE ...[...

JONES & SHIPMAN MODEL 1400?, HORIZONTAL SURFACE GRINDER, COMPLETE WITH 18" x 6", MAGNETIC CHUCK ...[more]

BLUE PAINTED, FLOOR STANDING, DUST EXTRACTOR ...[more]

NORMFINISH, FLOOR STANDING, GREY PAINTED, SHOT BLASTING CABINET, APPROXIMATELY 6' TALL x APPROXIMATELY 5' WIDE x APPROXIMATELY 5' DEEP ...[more]

NORTON NO. 6, VERTICAL FLY PRESS, COMPLETE WITH 3' x 35", T-SLOTTED TABLE ...[more]

NORTON 5DB, VERTICAL FLY PRESS, COMPLETE WITH 22" x 24", METAL TABLE ...[more]

MARL, VERTICAL PRESS ON 20" x 23" CABINET BASE ...[more]

NORTON, VERTICAL FLY PRESS, COMPLETE WITH 24" x 24" TABLE ...[more]

NORTON NO. 8, VERTICAL FLY PRESS, COMPLETE WTH GREEN PAINTED, STEEL FABRICATED TABLE, APPROXIMATELY 20" x 18" ...[more]

RHODES MODEL RHO100, 100T, VERTICAL, MECHANICAL PRESS ...[more]

HME MODEL G55, VERTICAL, MECHANICAL PRESS, SERIAL NO. 17371 ...[more]

EDWARDS TRUEFOLD, MANUAL, UP-SWINGING FOLDER, 4' WIDTH ...[more]

5½" WIDTH, 3-PHASE ELECTRIC BELT SANDER ...[more]

62", TIMBER FRAMED WORKBENCH, COMPLETE WITH HITACHI, SINGLE-PHASE ELECTRIC, CHOP SAW,COMPLETE WITH OTHER ITEMS ON BENCH, INCLUDING 2x BLUE PUNCHES...

MULTI-MIG MODEL 303-3, YELLOW CASED, SEMI-PORTABLE, MIG WELDER ...[more]

STARTRITE VOLANT 24, FLOOR STANDING, VERTICAL, WOODWORKING BANDSAW, 24" THROAT ...[more]

VISOR MODEL 6SV, VERTICAL FLY PRESS, COMPLETE WITH 43" x 27", STEEL WORKBENCH ...[more]

OXFORD, OIL-COOLED STICK WELDER ...[more]

MIGATRONIC 325, COMPACT MIG WELDER ...[more]

HYPERTHERM PLASMA CUTTER, COMPLETE WITH TROLLEY AND MISCELLANEOUS MIG WELDING LEADS AND HOSES ...[more]

HORDERN MASON & EDWARDS VERTICAL MECHANICAL PRESS, MODEL LM12, SERIAL NO. 13083 ...[more]

WORCESTER 18 VERTICAL MECHANICAL PRESS ...[more]

HORDERN MASON & EDWARDS (HME) VERTICAL MECHANICAL PRESS ...[more]

PROGRESS NO. 1 BENCH MOUNTABLE VERTICAL PILLAR DRILL COMPLETE WITH TIMBER TOPPED WORK BENCH, 37INCH x 3FT ...[more]

BRIERLEY MODEL 7B80 DRILL SHARPENER, SERIAL NO. 8102176 ...[more]

MORGAN RUSHWORTH 10MM CAPACITY APPROX. 3.1M WIDTH METAL CUTTING GUILLOTINE, MACHINE NO. BHG3100/10/10SB/989/215 ...[more]

PEARSON APPROX. 3.1M WIDTH GUILLOTINE, MACHINE NO. 7465, CAPACITY 10MM x 3050MM ...[more]

JASIC MIG 450 MIG WELDER COMPLETE WITH JASIC PO45 WIRE FEED ...[more]

MUREX TRANSMIG 293 MIG WELDER ...[more]

MAHE INVERTER MIG ECO+ MIG WELDER ...[more]