Refine your search
Category
- Processing (123)
- Restaurant & Bar Equipment (29)
- Pipes & Fittings (8)
- Complete Plants (6)
- Other Industrial Supplies & Equipment (6)
- Forklifts (3)
- Handling & Packaging (3)
- Warehouse Equipment (3)
- Compressors (2)
- Food Preparation (2)
- Processing Equipment (2)
- Tanks & Vessels (2)
- Analytical Instruments (1)
- Mixers & Blenders (1)
- Scissor Lifts (1)
- List
- Grid
-
192 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any enquiries.
DCI 1,000 DOME-TOP CONE-BOTTOM PROCESSOR,-S/N 90D40966A, EQUIPPED WITH TOP AND BOTTOM SWEEP/SCRAPE
DCI 1,000 DOME-TOP CONE-BOTTOM PROCESSOR,-S/N 90D40966A, EQUIPPED WITH TOP AND BOTTOM SWEEP/SCRAPE AGITATION, CIP SPRAY BALLS, MULTI-ZONE JACKET (...
Tennant Sit-Down Floor Scrubber,-M/N T-16, S/N T16-23389, 3144 GVW, 1,426 lbs.(NOTE: Battery Needs
Tennant Sit-Down Floor Scrubber,-M/N T-16, S/N T16-23389, 3144 GVW, 1,426 lbs.(NOTE: Battery Needs Charged or Replaced)(INV#88931) (Located @ the...
Generac Generator,-M/N 94A04280-S, S/N 2015763, 120/240 Volts, 1 Phase, with Transfer Switch (INV#
Generac Generator,-M/N 94A04280-S, S/N 2015763, 120/240 Volts, 1 Phase, with Transfer Switch (INV#88934) (Located @ the MDG Auction Showroom 2.0 i...
Cherry-Burrell S/S Batch Processor,-M/N FPDA, S/N 500-66-1381, with Top Mounted Agitation Motor,
Cherry-Burrell S/S Batch Processor,-M/N FPDA, S/N 500-66-1381, with Top Mounted Agitation Motor, with S/S Bottom Sweep Agitiation, with Dual CIP S...
Buusch 20 hp Vacuum Pump,-Type RA0400-B033-1103, S/N C1440, with Toshiba 208-230/460 Volts, 3 Phase,
Buusch 20 hp Vacuum Pump,-Type RA0400-B033-1103, S/N C1440, with Toshiba 208-230/460 Volts, 3 Phase, 1175 RPM (INV#88936) (Located @ the MDG Aucti...
Buusch 15 hp Vacuum Pump,-Type RC0400B0331004, S/N C6118, with Toshiba 1160 RPM Motor, 208-230/460
Buusch 15 hp Vacuum Pump,-Type RC0400B0331004, S/N C6118, with Toshiba 1160 RPM Motor, 208-230/460 Volts, 3 Phase (INV#88937) (Located @ the MDG A...
Buusch 15 hp Vacuum Pump,-Type RC0400B0331004, S/N C6955, with Toshiba 1150 RPM Motor, 208-230/460
Buusch 15 hp Vacuum Pump,-Type RC0400B0331004, S/N C6955, with Toshiba 1150 RPM Motor, 208-230/460 Volts, 3 Phase (INV#88938) (Located @ the MDG A...
United Utensils Co. Inc. Aprox. 40 S/S Vertical-Single Wall Tank, S/N 5638-7 VT38 T316, with Lighnin
United Utensils Co. Inc. Aprox. 40 S/S Vertical-Single Wall Tank, S/N 5638-7 VT38 T316, with Lighnin 3 hp Agitation Motor, 208-230/460 Volts, 3 Ph...
Bil-Jax Man-Lift,-M/N E.S.P., S/N ESP 19-0723, Max. Platform Lift: 19 ft., 24V, Mounted on Wheels (
Bil-Jax Man-Lift,-M/N E.S.P., S/N ESP 19-0723, Max. Platform Lift: 19 ft., 24V, Mounted on Wheels (INV#89088) (Located @ the MDG Auction Showroom ...
Technogel S/S Fruit Feeder,-Machine Type: FF10 Siemens, S/N 004731/04F, 380/50/60 Volts, Mounted
Technogel S/S Fruit Feeder,-Machine Type: FF10 Siemens, S/N 004731/04F, 380/50/60 Volts, Mounted on Portable Frame (NOTE: Skidded & Ready to Shi...
S/S Single Wall Traugh,-Internal Dims.: Aprox. 41" L x 21" W x 16" Deep, with Rear S/S Rack, Mounted
S/S Single Wall Traugh,-Internal Dims.: Aprox. 41" L x 21" W x 16" Deep, with Rear S/S Rack, Mounted on S/S Frame (KH269) (INV#82561)(Located @ t...
S/S Single Wall Traugh,-Internal Dims.: Aprox. 40" L x 21" W x 15" Deep, with Internal Spray Piping,
S/S Single Wall Traugh,-Internal Dims.: Aprox. 40" L x 21" W x 15" Deep, with Internal Spray Piping, Mounted on S/S Portable Frame (KH307)(INV#82...
MARCHANT SCHMIDT S/S DUST COLLECTOR,-DRAWING # MM761006, JOB # 19954-E02, 460 V, 3 PHASE (YOG117) (
MARCHANT SCHMIDT S/S DUST COLLECTOR,-DRAWING # MM761006, JOB # 19954-E02, 460 V, 3 PHASE (YOG117) (INV#86252)(Located @ the MDG Showroom 2.0 in Mo...
2005 Readco S/S Extruder,-Machine 5 Inch C.P., S/N 108530, with Some S/S Spare Parts, Includes (2)
2005 Readco S/S Extruder,-Machine 5 Inch C.P., S/N 108530, with Some S/S Spare Parts, Includes (2) S/S Augers, (2) S/S Heads with Portable Cart, w...
Walker S/S Curd Breaker,-M/N HOPPER, S/N 7164, with Dual S/S Internal Breaker Arm, with Pacemaker 15
Walker S/S Curd Breaker,-M/N HOPPER, S/N 7164, with Dual S/S Internal Breaker Arm, with Pacemaker 15 hp Motor, 1745 RPM Motor, 230/460 Volts, 3 Ph...
ARPAC S/S Shrink Bundler,-M/N 112 SS-24, S/N 3002, 480 Volts, 3 Phase, with Aprox. 15" W DIscharge
ARPAC S/S Shrink Bundler,-M/N 112 SS-24, S/N 3002, 480 Volts, 3 Phase, with Aprox. 15" W DIscharge Conveyor, with S/S Control Panel with Allen-Bra...
Seydelmann S/S Bowl Chopper,-with S/S Blade (NOTE: Professionally Skidded & Ready to Ship!)(INV#
Seydelmann S/S Bowl Chopper,-with S/S Blade (NOTE: Professionally Skidded & Ready to Ship!)(INV#88837) (Located @ the MDG Auction Showroom 2.0 in...
VEMAG S/S Stuffer,-M/N ROBOT 500, 220 Volts, with Casters (NOTE: Professionally Skidded & Ready to
VEMAG S/S Stuffer,-M/N ROBOT 500, 220 Volts, with Casters (NOTE: Professionally Skidded & Ready to Ship!) (INV#88834) ((Located @ the MDG Auction...
Separator Inc. S/S Separator,-M/N MRPX4179IV316, S/N 2991595, Bowl RPM 3960(INV#88847) (Located @
Separator Inc. S/S Separator,-M/N MRPX4179IV316, S/N 2991595, Bowl RPM 3960(INV#88847) (Located @ the MDG Auction Showroom 2.0 in Monroeville, PA)...
Alpha Laval 10 hp Centrifugal Pump,-M/N 9613976308, S/N 879752, Aprox. 2-1/2" x 2" Clamp Type S/S
Alpha Laval 10 hp Centrifugal Pump,-M/N 9613976308, S/N 879752, Aprox. 2-1/2" x 2" Clamp Type S/S Head, with Baldor 3450 RPM, 208-230/460 Volts, 3...
15 hp Centrifugal Pump,-with Aprox. 3" x 1-1/2" S/S Head, 208-230/460 Volts, 3 Phase (INV#87442)(
15 hp Centrifugal Pump,-with Aprox. 3" x 1-1/2" S/S Head, 208-230/460 Volts, 3 Phase (INV#87442)(Located @ the MDG Showroom 2.0 in Monroeville, PA...
S/S Single Wall Traugh,-Internal Dims.: Aprox. 30" L x 17-1/2" W x 12" Deep, Mounted on S/S Portable
S/S Single Wall Traugh,-Internal Dims.: Aprox. 30" L x 17-1/2" W x 12" Deep, Mounted on S/S Portable Frame (KH633) (INV#82563)(Located @ the MDG ...
Tri-Flo 10 hp Centrifugal Pump,-with Aprox. 3" x 2" S/S Head, with SuperE S/S Clad Motor, 1770
Tri-Flo 10 hp Centrifugal Pump,-with Aprox. 3" x 2" S/S Head, with SuperE S/S Clad Motor, 1770 RPM, 208-230/460 Volts, 3 Phase (INV#87441)(Located...
5 hp Water Pump,-with Baldor 3450 RPM, 208-230/460 Volts, 3 Phase, with S/S Elbow Fitting (INV#
5 hp Water Pump,-with Baldor 3450 RPM, 208-230/460 Volts, 3 Phase, with S/S Elbow Fitting (INV#87440)(Located @ the MDG Showroom 2.0 in Monroevill...
2 hp Centrifugal Pump,-with Aprox. 2" x 2-1/2" S/S Head, with Sterling S/S Clad Motor, 1750 RPM (
2 hp Centrifugal Pump,-with Aprox. 2" x 2-1/2" S/S Head, with Sterling S/S Clad Motor, 1750 RPM (INV#87439)(Located @ the MDG Showroom 2.0 in Monr...
Crepaco 3/2 hp Centrifugal Pump,-with 3500/2900 RPM Motor, with S/S Head with Weld Type Reducer,
Crepaco 3/2 hp Centrifugal Pump,-with 3500/2900 RPM Motor, with S/S Head with Weld Type Reducer, 230/460 Volts, 3 Phase (INV#87438)(Located @ the ...
5 hp Centrifugal Pump,-with Baldor 3500 RPM Motor, 230/460 Volts, 3 Phase, with S/S Check Valve (
5 hp Centrifugal Pump,-with Baldor 3500 RPM Motor, 230/460 Volts, 3 Phase, with S/S Check Valve (INV#87437)(Located @ the MDG Showroom 2.0 in Monr...
Tri-Clover Aprox. 3 hp Centrifugal Pump,-M/N C216MD56T, with Aprox. 2-1/2" x 1-1/2" S/S Head (INV#
Tri-Clover Aprox. 3 hp Centrifugal Pump,-M/N C216MD56T, with Aprox. 2-1/2" x 1-1/2" S/S Head (INV#87444)(Located @ the MDG Showroom 2.0 in Monroev...
(2) S/S CIP Tank Doors-(INV#87445)(Located @ the MDG Showroom v2.0 in Monroeville, PA)(Handling,
(2) S/S CIP Tank Doors-(INV#87445)(Located @ the MDG Showroom v2.0 in Monroeville, PA)(Handling, Loading & Site Management Fee: $50.00 USD) ...[m...
(2) Atlantic Ultraviolet S/S Units,-Overall Dims.: Aprox. 37" L x 10" W x 10" H(INV#87446)(Located @
(2) Atlantic Ultraviolet S/S Units,-Overall Dims.: Aprox. 37" L x 10" W x 10" H(INV#87446)(Located @ the MDG Showroom v2.0 in Monroeville, PA)(Ha...
(2) S/S U.S. Filters,-M/N T91-33-330-32, with Valving & Gauges (INV#87483)(Located @ the MDG Showroom 2.0 in Monroeville, PA)(Handling, Loading & ...
(6) 2017 Alpha-Laval Tri-Clover S/S Air Valve-Cluster, Type 7000, Clamp Type with S/S Manifold, (
(6) 2017 Alpha-Laval Tri-Clover S/S Air Valve-Cluster, Type 7000, Clamp Type with S/S Manifold, (INV#87481)(Located @ the MDG Showroom 2.0 in Monr...
S/S Control Panel,-with StrongArm Display, with Allen-Bradley EtherNet Units & Other Contents (INV#
S/S Control Panel,-with StrongArm Display, with Allen-Bradley EtherNet Units & Other Contents (INV#87447)(Located @ the MDG Showroom 2.0 in Monroe...
Alpha-Laval 30 hp Centrifugal Pump,-M/N 9614399905, S/N 902428, 208-230/460 Volts, 3 Phase, with
Alpha-Laval 30 hp Centrifugal Pump,-M/N 9614399905, S/N 902428, 208-230/460 Volts, 3 Phase, with Aprox. 3" x 2-1/2" S/S Head, with S/S Clad Motor ...
Alpha-Laval 30 hp Centrifugal Pump,-S/N 73363, 230/460 Volts, 3 Phase, with Aprox. 3" x 2" Clamp
Alpha-Laval 30 hp Centrifugal Pump,-S/N 73363, 230/460 Volts, 3 Phase, with Aprox. 3" x 2" Clamp Type S/S Head (INV#87449)(Located @ the MDG Showr...
Alpha-Laval 30 hp Centrifugal Pump,-M/N 9614406993,S/N 907455, with Baldor 1770 RPM Motor, 230/460
Alpha-Laval 30 hp Centrifugal Pump,-M/N 9614406993,S/N 907455, with Baldor 1770 RPM Motor, 230/460 Volts, 3 Phase (INV#87450)(Located @ the MDG Sh...
S/S Flow Diversion Valve,-Aprox. 2" Clamp Type (INV#87452)(Located @ the MDG Showroom 2.0 in Monroeville, PA)(Handling, Loading & Site Management ...
Crepaco 5 hp Centrifugal Pump,-S/N 6V-84, with Baldor 1750 RPM Motor, 230/460 Volts, 3 Phase, with
Crepaco 5 hp Centrifugal Pump,-S/N 6V-84, with Baldor 1750 RPM Motor, 230/460 Volts, 3 Phase, with S/S Clad Motor (INV#87451)(Located @ the MDG Sh...
(3) FlowTrend S/S Air Valves,-M/N 361, Aprox. 3" Clamp Type (INV#87453)(Located @ the MDG Showroom
(3) FlowTrend S/S Air Valves,-M/N 361, Aprox. 3" Clamp Type (INV#87453)(Located @ the MDG Showroom 2.0 in Monroeville, PA)(Handling, Loading & Sit...
(3) S/S Waukesha Air Valves with S/S Manifold,-700 Series, with S/S Manifold (INV#87454)(Located @
(3) S/S Waukesha Air Valves with S/S Manifold,-700 Series, with S/S Manifold (INV#87454)(Located @ the MDG Showroom 2.0 in Monroeville, PA)(Handli...
(3) S/S Tanks Doors,-Overall Dims.: Aprox. 22" x 18" (INV#87455)(Located @ the MDG Showroom 2.0 in
(3) S/S Tanks Doors,-Overall Dims.: Aprox. 22" x 18" (INV#87455)(Located @ the MDG Showroom 2.0 in Monroeville, PA)(Handling, Loading & Site Mana...
(2) S/S Sani-Matic Filters,-Overall Dims.: Aprox. 39" L, Clamp Type (INV#87456)(Located @ the MDG
(2) S/S Sani-Matic Filters,-Overall Dims.: Aprox. 39" L, Clamp Type (INV#87456)(Located @ the MDG Showroom 2.0 in Monroeville, PA)(Handling, Load...
Straight Section of Conveyor,-Conveyor Aprox. 75" L x 24" W Belt, x 41" H (Belt to Ground), with
Straight Section of Conveyor,-Conveyor Aprox. 75" L x 24" W Belt, x 41" H (Belt to Ground), with Dirve, Mounted on S/S Portable Frame (INV#88838) ...
SAFELINE Mettler Toledo S/S Metal Detector,-Ref. Number: 15370-01, Product Opening: Aprox. 12" W x
SAFELINE Mettler Toledo S/S Metal Detector,-Ref. Number: 15370-01, Product Opening: Aprox. 12" W x 3-1/2" H (Conveyor to Top) x 11" Deep, Width ...
Goring Kerr S/S Metal Detector Head,-S/N 23090, Opening Dims.: Aprox. 17-1/2" W x 9-3/4" H x 16"
Goring Kerr S/S Metal Detector Head,-S/N 23090, Opening Dims.: Aprox. 17-1/2" W x 9-3/4" H x 16" Deep, with Digital Display (INV#88829) (Located ...
THERMO Goring Kerr S/S Metal Detector,-M/N DSP3/S-PSU, Class II, 120/230 VAC, Opening Dims.: Aprox. 9-3/4" W x 7" H (Conveyor to Top) x 14" Deep,...
Goring Kerr S/S Metal Detector,-Opening Dims.: Aprox. 10" W x 4" H x 13-1/2" Deep, with Straight
Goring Kerr S/S Metal Detector,-Opening Dims.: Aprox. 10" W x 4" H x 13-1/2" Deep, with Straight Section of Conveyor, Aprox. 76" L x 8" W Plastic...
2011 Johnson Industries International Inc. S/S-Cheese Press Hoist, M/N CJ-6400-LCI-28, S/N 5457-
2011 Johnson Industries International Inc. S/S-Cheese Press Hoist, M/N CJ-6400-LCI-28, S/N 5457-05, with Additional Cheese Press Attachment on Ski...
BetaVac Double Chamber Vacuum Packaging Machine,-M/N R1270 501, M/N NZ0098E, 230/240 Volts, 3 Phase,
BetaVac Double Chamber Vacuum Packaging Machine,-M/N R1270 501, M/N NZ0098E, 230/240 Volts, 3 Phase, with Straight Section of Conveyor (NOTE: Pro...
S/S Balance Tank & Goulds Pump Skid,-with Aprox. 20 Gal. S/S Single Shell Tank, with 1-1/2 hp
S/S Balance Tank & Goulds Pump Skid,-with Aprox. 20 Gal. S/S Single Shell Tank, with 1-1/2 hp Pump, Includes Transfer Hose & NEW S/S Clamps Inside...
AMI RecPro Inc. Zipper Applicator,-M/N D-22888RDP, S/N 01022803, Mounted on Casters (NOTE: Professionally Skidded & Ready to Ship!)(INV#88840) (L...
Schneider Laner Diverter,-with Aprox. 30" W Plastic Conveyor, with Double Door Control Panel, with
Schneider Laner Diverter,-with Aprox. 30" W Plastic Conveyor, with Double Door Control Panel, with Allen-Bradley PLC (INV#88841) (Located @ the MD...
(2) ABB Commander 1900 Chart Recorders-(INV#84893)(Located @ the MDG Showroom v2.0 in Monroeville,
(2) ABB Commander 1900 Chart Recorders-(INV#84893)(Located @ the MDG Showroom v2.0 in Monroeville, PA)(Handling, Loading & Site Management Fee: $5...
Hobart VCM,-M/N VC1440, S/N J-71-10510, 208 Volts, 3 Phase (INV#88933) (Located @ the MDG Auction
Hobart VCM,-M/N VC1440, S/N J-71-10510, 208 Volts, 3 Phase (INV#88933) (Located @ the MDG Auction Showroom 2.0 in Monroeville, PA)(Handling, Loadi...
SIPROMAC S/S Dual Vacuum Sealer,-Chamber Dims.: Aprox. 25-3/4" L x 19-1/4" W, with Bottom Mounted
SIPROMAC S/S Dual Vacuum Sealer,-Chamber Dims.: Aprox. 25-3/4" L x 19-1/4" W, with Bottom Mounted Vacuum Pump, Mounted on S/S Frame (INV#88944) (...
Lee Aprox. 50 Gal. Kettle,-with Agitation, with Tilt Capability, with Top Mounted Agitation Motor,
Lee Aprox. 50 Gal. Kettle,-with Agitation, with Tilt Capability, with Top Mounted Agitation Motor, Mounted on Frame (INV#89087) (Located @ the MDG...
APV Plate Heat Exchanger,-M/N HX-S, S/N 15617, with Aprox. (57) Plate, Moutned on S/S Frame (INV#
APV Plate Heat Exchanger,-M/N HX-S, S/N 15617, with Aprox. (57) Plate, Moutned on S/S Frame (INV#88845) (Located @ the MDG Auction Showroom 2.0 in...
Koss Inc. S/S Cheese Cooker,-S/N 5APR1996, with 5 hp Motor, 208-230/460 Volts, 3 Phase, Mouned on
Koss Inc. S/S Cheese Cooker,-S/N 5APR1996, with 5 hp Motor, 208-230/460 Volts, 3 Phase, Mouned on Portable S/S Frame (INV#88844) (Located @ the MD...
S/S Automatic Cheese Harp Cutter,-with Assortment of S/S Harps, with Allen-Bradley PLC, Mounted on
S/S Automatic Cheese Harp Cutter,-with Assortment of S/S Harps, with Allen-Bradley PLC, Mounted on S/S Portable Frame (NOTE: Missing Some Control...
Alfa-Laval 4-Section Plate Press Heat Exchanger,-Type H7-FMC, S/N 4227, Max. Work Pressure 1.0
Alfa-Laval 4-Section Plate Press Heat Exchanger,-Type H7-FMC, S/N 4227, Max. Work Pressure 1.0 MPa, 10 Bar, Max. Work Temp. 140 C 285 F, Mounted o...
-
192 item(s)/page