- List
- Grid
-
65 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any enquiries.
An XYZ Proturn 360 CNC Centre Lathe with Prototrak LX3 Controls: Swing Over Bed 380mm, Swing Over
An XYZ Proturn 360 CNC Centre Lathe with Prototrak LX3 Controls: Swing Over Bed 380mm, Swing Over Cross Slide 240mm, Between Centres 750mm, Spindl...
An XYZ SM3000 3 Axis CNC Turret Milling Machine with Prototrak SM Control, Table 1370mm x 300mm,
An XYZ SM3000 3 Axis CNC Turret Milling Machine with Prototrak SM Control, Table 1370mm x 300mm, Spindle Taper 40 INT, Speeds 70-3600rpm, Power D...
A SHUSTER Model 1AVS5 Automatic and Vari-speed Wire Straightening and Cutting Machine, Capacity 1/
A SHUSTER Model 1AVS5 Automatic and Vari-speed Wire Straightening and Cutting Machine, Capacity 1/4in, Maximum Diameter, Max Speed 144 Cuts per mi...
A MORGAN RUSHWORTH Direct Drive Power Sheet Metal Guillotine, Capacity 3000mm x 3mm, Manual Back
A MORGAN RUSHWORTH Direct Drive Power Sheet Metal Guillotine, Capacity 3000mm x 3mm, Manual Back Gauge. ...[more]
A HYD-MECH H-10A Automatic Horizontal Band Saw: Capacity 10in Round & Square, High Speed Shuttle
A HYD-MECH H-10A Automatic Horizontal Band Saw: Capacity 10in Round & Square, High Speed Shuttle Feed Indexing up to 24in, Blade Size 1.25in, Main...
A BEHRINGER Type HBP-320A Automatic Horizontal Bandsaw: Capacity 320mm, Blade Speed 15-180 m/min,
A BEHRINGER Type HBP-320A Automatic Horizontal Bandsaw: Capacity 320mm, Blade Speed 15-180 m/min, Blade Size 4850 x 34 x 1.1mm.
A BOGE Type C7 LDR-270 Receiver Mounted Rotary Screw Air Compressor: Flow Rate 0.728 m/min, Max
A BOGE Type C7 LDR-270 Receiver Mounted Rotary Screw Air Compressor: Flow Rate 0.728 m/min, Max Pressure 10 Bar, Motor Power 5.5kW, CFM 25 with 27...
A PRYOR MARKTRONIC MULTIDOT 2068 Dot Marking Machine: Variable Force Control, Materials up to 62R,
A PRYOR MARKTRONIC MULTIDOT 2068 Dot Marking Machine: Variable Force Control, Materials up to 62R, Memory Capacity up to 1350 Layouts.
A Dean Smith and Grace Type 17 x 36 Tool Room Centre Lathe: Swing Over Bed 18in, Between Centres 36in, Spindle Bore 2.75in with 3 Jaw Chuck, Drill...
A Wewag Model 50/2000 Centre Lathe: Swing Over Bed 500mm, Distance Between Centres 2000mm, Spindle Bore 55mm, Spindle Speeds 18-1800rpm, 4 Jaw Chu...
A HARRISON M300 Gap Bed Centre Lathe: Swing Over Bed 13in, Distance Between Centres 40in, Speeds
A HARRISON M300 Gap Bed Centre Lathe: Swing Over Bed 13in, Distance Between Centres 40in, Speeds 40-2500rpm, 3 Jaw Chuck, 3 Point Steady, Quick Ch...
An IEMCA TYPE 16 MODEL KID 80 Short Bar Magazine Bar Feeder with Siemens TD200 Controls (2008).
An IEMCA TYPE 16 MODEL KID 80 Short Bar Magazine Bar Feeder with Siemens TD200 Controls (2008). ...[more]
An IEMCA TYPE 16 MODEL KID 80 Short Bar Magazine Bar Feeder with Siemens TD200 Controls (2009).
An IEMCA TYPE 16 MODEL KID 80 Short Bar Magazine Bar Feeder with Siemens TD200 Controls (2009). ...[more]
A BRIDGEPORT Series I 2HP Varispeed Turret Milling Machine, Spindle Taper R8, Spindle Speeds 50-
A BRIDGEPORT Series I 2HP Varispeed Turret Milling Machine, Spindle Taper R8, Spindle Speeds 50-3750rpm, Table 42in x 9in, Power Feed to Table, 2 ...
A BRIDGEPORT Type BR2J Varispeed Turret Milling Machine, Spindle Taper R8, Table 42in x 9in, Speeds 50-3750rpm, Power Feed to Table.
An AEW VICEROY HORIZON Horizontal Milling Machine: Table 35in x 8in, Power Feed in X Axis, Spindle
An AEW VICEROY HORIZON Horizontal Milling Machine: Table 35in x 8in, Power Feed in X Axis, Spindle Taper 30 ISO, 2 Axis Digital Readout. ...[more]
An ACIERA F3 Horizontal Milling Machine: Table 700mm x 190mm, Spindle Speeds 155-2500rpm.
A Jones and Shipman 1400L Surface Grinder, Capacity 24in x 8in with Diaform Wheel Former, Close Pole, 24in x 8in Magnetic Chuck NB. this machine i...
A Jones and Shipman 540P Surface Grinder, Capacity 18in x 6in, power rise and fall to wheel head NB. this machine is being re-offered from our las...
A JONES and SHIPMAN Type 1415 Toolroom Surface Grinder: Capacity 27in x 12in, Power Rise and Fall to
A JONES and SHIPMAN Type 1415 Toolroom Surface Grinder: Capacity 27in x 12in, Power Rise and Fall to Wheelhead with Magnetic Chuck and Coolant Tan...
A MYFORD MG12-HA Hydraulic Cylindrical Grinder: Maximum Grinding Capacity 3in Diameter, Swing Over
A MYFORD MG12-HA Hydraulic Cylindrical Grinder: Maximum Grinding Capacity 3in Diameter, Swing Over Table 5in, Max Table Travel 13.75in, Capacity B...
A JONES and SHIPMAN 540L Long Column Tool Room Surface Grinder: Capacity 18in x 6in, Height Under
A JONES and SHIPMAN 540L Long Column Tool Room Surface Grinder: Capacity 18in x 6in, Height Under Wheel 16in, Power Rise & Fall. ...[more]
A JONES and SHIPMAN 540P Surface Grinder: Capacity 18in x 6in, Power Rise and Fall.
A CHRISTEN 1-32/100A Drill Grinding Machine: Capacity 1-32mm, Max Step Length 50mm, Point Angle 60-
A CHRISTEN 1-32/100A Drill Grinding Machine: Capacity 1-32mm, Max Step Length 50mm, Point Angle 60-180 Degrees.
A CLARKSON MKII Tool and Cutter Grinder: Capacity 12in x 6in, Pair of Centres, Universal Head.
A CLARKSON MKII Tool and Cutter Grinder: Capacity 12in x 6in, Pair of Centres, Universal Head.
A BRIERLEY CUTTERMASTER Drill and Milling Grinder: Standard End Mills-Radius Mills, Taper End
A BRIERLEY CUTTERMASTER Drill and Milling Grinder: Standard End Mills-Radius Mills, Taper End Mills-Corner Radius, Countersinks, Taps and Drills.
An ALMI ALI-2U Multi Pipe Notcher: Capacity 27.9/34.9/ 42.8/49.0/61.0mm, Pedestal Mounted. ...[more]
An RJH Horizontal Belt Sander: Belt 4in x 12in fitted to Pedestal Stand.
A CREUSEN DPC2000 Double Ended Pedestal Polishing Machine fitted to Dust Extraction Unit. ...[more]
An RJH BISON Double Ended Pedestal Grinder: Wheel Size 250 x 25 x 20mm Bore.
A KITCHEN and WALKER Type E3 6ft Radial Arm Drill: Drilling Capacity 1/4in-3in, Spindle 5MT (3in
A KITCHEN and WALKER Type E3 6ft Radial Arm Drill: Drilling Capacity 1/4in-3in, Spindle 5MT (3in capacity), Speeds 12-1000rpm, Table 50in x 36in x...
An ARCHDALE 3ft 6in Radial Arm Drill: 2in Drilling Capacity, Spindle Taper No.4 Morse, Box Table
An ARCHDALE 3ft 6in Radial Arm Drill: 2in Drilling Capacity, Spindle Taper No.4 Morse, Box Table 40in x 30in x 20in High.
A MEDDINGS Heavy Duty Pillar Drill: Table 17in x 15in, Speeds 90-1570rpm, Throat 11in, 3MT, Power
A MEDDINGS Heavy Duty Pillar Drill: Table 17in x 15in, Speeds 90-1570rpm, Throat 11in, 3MT, Power Feed. ...[more]
A HERBERT Pedestal Drill: Table 18in x 15in, 2 Morse Taper, Speeds 51-2650rpm. ...[more]
A MEDDINGS Type LF2/FS Pillar Drill, Speeds 500-4000rpm, Table 13in x 13in, Throat 7in. ...[more]
An ELLIOTT Model 16 Bench Drill: Capacity 13mm, 4 Speeds 460-2900rpm, Drilling Depth 87mm, Table
An ELLIOTT Model 16 Bench Drill: Capacity 13mm, 4 Speeds 460-2900rpm, Drilling Depth 87mm, Table Size 235mm x 235mm. ...[more]
An Archdale 4ft Radial Arm Drill, Spindle Taper 5, Morse 3in, Spindle Speeds 60-1500rpm.
A BAILEIGH Type BS350M Dual Mitring Horizontal Bandsaw: Capacity Round 270mm, Flat 350 x 220mm,
A BAILEIGH Type BS350M Dual Mitring Horizontal Bandsaw: Capacity Round 270mm, Flat 350 x 220mm, Blade Speed 20-85 m/min (2013).
An ANBAS Type ZAC 330 VA Double Mitre Horizontal Bandsaw: Max Diameter 330mm, Hydraulic Assisted
An ANBAS Type ZAC 330 VA Double Mitre Horizontal Bandsaw: Max Diameter 330mm, Hydraulic Assisted Vice, Power Rise and Fall.
A STARTRITE Type 316H Toolroom Vertical Bandsaw: Throat 36in, Daylight 16in, Power Cross to Table,
A STARTRITE Type 316H Toolroom Vertical Bandsaw: Throat 36in, Daylight 16in, Power Cross to Table, Variable Speed, Blade Welding Attachment.
A PROMECAM Type RG-65-25 Hydraulic Upstroking Press Brake: Capacity 2500mm x 65 ton, Power Back
A PROMECAM Type RG-65-25 Hydraulic Upstroking Press Brake: Capacity 2500mm x 65 ton, Power Back Gauge, New Hurco Autobend 7 Controls fitted in 201...
A K and B Downstroking Hydraulic Press Brake: Capacity 2500mm x 50 ton, Distance Between Side Frames
A K and B Downstroking Hydraulic Press Brake: Capacity 2500mm x 50 ton, Distance Between Side Frames 2100mm, Manual Back Gauge, Light Guards, Foot...
A PRESS + SHEAR STRIPPIT SUPER 30/30/30 FABRICATOR Punch: Capacity Punching Table 48in x 40in,
A PRESS + SHEAR STRIPPIT SUPER 30/30/30 FABRICATOR Punch: Capacity Punching Table 48in x 40in, Copying Table 40in x 32in, New Punching Guard, 2 Ax...
A EDWARDS Truecut Model 3.25/2500DD Power Guillotine: Capacity 2535mm x 3.25mm, Blade Gap Adjustment, Manual Backgauge, Front Supports. ...[more]
An ELLIOTT 18" MAJOR Shaping and Slotting Machine, Capacity 18in, Strokes 12-110/min, 6 Speeds 4-125
An ELLIOTT 18" MAJOR Shaping and Slotting Machine, Capacity 18in, Strokes 12-110/min, 6 Speeds 4-125 fpm, Feeds 0-0.060, Table Size 18in x 12in, S...
A WALTONS TYPE BPFM 80-14 Manual Sheet Metal Box and Pan Folding Machine, 80in x 14SWG.
An FJ EDWARDS HIGH LIFT Manual Sheet Metal Folding Machine: Capacity 60in x 14SWG. ...[more]
An AMADA Type CSW-220 Hydraulic Sheet Metal Corner Notcher: Capacity 200mm x 2mm Mild Steel, 200mm x
An AMADA Type CSW-220 Hydraulic Sheet Metal Corner Notcher: Capacity 200mm x 2mm Mild Steel, 200mm x 1.5mm Stainless with Rear Square Notcher 100m...
A EUROMAC Type 200/6 Hydraulic Sheet Metal Corner Notcher: Capacity 200mm x 6mm (8in x 1/4in).
A EUROMAC Type 200/6 Hydraulic Sheet Metal Corner Notcher: Capacity 200mm x 6mm (8in x 1/4in).
A Set of F.J. EDWARDS Motorised Initial Pinch Rolls: Length of Rolls 48in, Diameter of Rolls 4in.
A Set of F.J. EDWARDS Motorised Initial Pinch Rolls: Length of Rolls 48in, Diameter of Rolls 4in. ...[more]
A Set of EDWARDS Initial Pinch Sheet Metal Rolls: Length of Rolls 30in, Diameter of Rolls 1.75in.
A Set of EDWARDS Initial Pinch Sheet Metal Rolls: Length of Rolls 30in, Diameter of Rolls 1.75in.
An ELECTRO ARC 2DBT Tap and Bolt Disintegrator: Table 26in x 18in, Swivel Head 90 Degrees, Quill
An ELECTRO ARC 2DBT Tap and Bolt Disintegrator: Table 26in x 18in, Swivel Head 90 Degrees, Quill Travel 8in, Vertical Travel 30in, Horizontal Trav...
A HYDROVANE Type HV11 Model 711-PSAS08-4035S200 Rotary Air Compressor: Max BAR 9, Motor 11kW, Flow
A HYDROVANE Type HV11 Model 711-PSAS08-4035S200 Rotary Air Compressor: Max BAR 9, Motor 11kW, Flow Rate 1.7 m3./min, CFM Approx 60, indicated 445...
A 3D SYSTEMS ProJet 260C 3D Colour Printer: Max Build Size 236 x 185 x 127mm, Min. Feature Size 0.
A 3D SYSTEMS ProJet 260C 3D Colour Printer: Max Build Size 236 x 185 x 127mm, Min. Feature Size 0.4mm, Print Heads 2 x CJP, Layer Thickness 0.1mm ...
A FRATELLI GALLI Model G-2100 Oven: Aperture 300mm x 300mm x 250mm Deep; Max Temp 300 Deg, Single
A FRATELLI GALLI Model G-2100 Oven: Aperture 300mm x 300mm x 250mm Deep; Max Temp 300 Deg, Single Phase. ...[more]
A CLARKE 450TE TURBO Arc Welding Machine: Cap. 40-400amp, Accepts Electrodes 1.6-6mm, Power Input
A CLARKE 450TE TURBO Arc Welding Machine: Cap. 40-400amp, Accepts Electrodes 1.6-6mm, Power Input 230/400v. ...[more]
A Blacksmiths Anvil on Stand, 1 cwt-51Kilos.
A BECK Type BE-TL100/100D/MM Vacuum Extraction Bench, Work Surface 1000mm x 700mm. ...[more]
A KINGSLAND TYPE A94 Hand Cropper: Plate Size 250mm x 3mm, Round Bar 12mm, Flat Bar 25mm x 5mm on
A KINGSLAND TYPE A94 Hand Cropper: Plate Size 250mm x 3mm, Round Bar 12mm, Flat Bar 25mm x 5mm on pedestal stand. ...[more]
A POLSTORE Multi-Drawer Storage Cabinet with 11 Sliding Drawers: Size 800mm Wide x 750mm Deep x
A POLSTORE Multi-Drawer Storage Cabinet with 11 Sliding Drawers: Size 800mm Wide x 750mm Deep x 1600mm High. ...[more]
Loading...-
65 item(s)/page