12
** BRAND NEW ** Unused Armstrong DR-SG-15 Electric start - Stump Grinder
1/23
1,050
GBP
Colsterworth, Lincolnshire
Description
You are bidding on a ** BRAND NEW ** Unused Armstrong DR-SG-15 Electric start - Stump Grinder.
Brand New, in the box.
- Briggs and Stratton 420cc XR2100 Professional 13.5hp Euro V Petrol Engine
- Electric Key Start with pull start back up.
- Low oil shut off protection
- Manual and Tool kit
- Full safety “Deadman’s” Handle – must be held constantly to operate machine.
- Operator protection with heavy duty fully guarded chassis rubber deflector screen.
The Armstrong DR-SG-15 Stump Grinder is built to decimate stubborn tree stumps left behind after felling trees, even up to 3ft in diameter. Capable of clearing stumps and roots up to 235mm (9 inches) deep, with an impressive above ground capability of 600mm (24 inches) this is one of the most capable machines on the market, designed and engineered to give unrivalled performance in its class.
Engineered to be worked hard and be ultra-reliable, this high powered, electric start grinder can chew through even the most stubborn stumps in no time.
To compliment the engineering and strength built into the design, we have partnered with the world-renowned Briggs and Stratton Engines company to provide the power for our full range of arboricultural equipment. Bringing Euro V emissions standards, we’re proud to be able to supply the most up to date environmentally friendly petrol power with optimal fuel economy and reliability.
The Armstrong DR-SG-15 features the Briggs and Stratton 400cc XR Professional 13.5HP single cylinder petrol engine, which transmits its power to the mining-grade tungsten carbide tipped grinding wheel via a centrifugal clutch and a pair of heavy-duty rubber drive belts.
The 400cc powerplant rotates the heavy duty 304mm diameter stump grinding wheel at 3600 revs per minute, making light work of any wood with is 9 carbide tipped teeth. The stump grinding teeth have been specially designed so they can be re-sharpened several times before a replacement set is needed. This makes the machine very economical to run.
Engineered with the operator in mind, the sturdy frame has a wheelbase of only 80cm making access into most locations very easy. Large pneumatic tyres have been specified make transport of the machine to the jobsite easy. With a weight of only 110kg operation of the stump grinder is simple and straightforward. The hand brake is applied, which locks the drum brake on the left wheel, cleverly designed to allow for the machine to be arced from left to right across the stump milling it away easily by using the well-balanced weight of the machine to the operator’s advantage. The handle is fully adjustable to assist any likely arc of operation, allowing it to be adjusted to the most comfortable position for the operator depending on whether the stump is above or below ground level. The ergonomic handle can also be fully folded over to assist in storing the machine.
For operator safety, a full width chassis deflector curtain is fitted to prevent debris from being ejected from beneath the machine. All drive belts and the grinding wheel itself are also protected by guards. An essential for safe operation is the integrated “dead man’s handle” safety lever fitted to the handle. This must be permanently held for the machine to run. Without it the operators grip, the engine simply cuts out and stops operation.
Specifications:
|
Briggs and Stratton XR2100 Professional 13.5hp Euro V 4-stroke OHV petrol engine
|
|
420 cc
|
|
9 kW at 3,600 rpm
|
|
Unleaded petrol – E10 Compatible
|
|
6.5 litres
|
|
1.1L SAE 10W30 or 40
|
|
Electric Key start with pull start back up.
|
|
304.8 mm
|
|
235 mm |
|
600 mm |
|
125/110 kg
|
|
9 |
|
110 dB (A)
|
|
1060/800/590mm
|
|
2650/800/1150 mm |
*** This unit is new and unused – it will require commissioning prior to first use. The engines are preserved from the factory for transport and will require oil. The machine will require building and checking by a competent person. Please ensure all drive belts and blades are checked and adjusted as per the instructions prior to 1st use. **
Auction Details
Shipping
T&Cs & Important Info
Ask seller a question
You are bidding on a ** BRAND NEW ** Unused Armstrong DR-SG-15 Electric start - Stump Grinder.
Brand New, in the box.
- Briggs and Stratton 420cc XR2100 Professional 13.5hp Euro V Petrol Engine
- Electric Key Start with pull start back up.
- Low oil shut off protection
- Manual and Tool kit
- Full safety “Deadman’s” Handle – must be held constantly to operate machine.
- Operator protection with heavy duty fully guarded chassis rubber deflector screen.
The Armstrong DR-SG-15 Stump Grinder is built to decimate stubborn tree stumps left behind after felling trees, even up to 3ft in diameter. Capable of clearing stumps and roots up to 235mm (9 inches) deep, with an impressive above ground capability of 600mm (24 inches) this is one of the most capable machines on the market, designed and engineered to give unrivalled performance in its class.
Engineered to be worked hard and be ultra-reliable, this high powered, electric start grinder can chew through even the most stubborn stumps in no time.
To compliment the engineering and strength built into the design, we have partnered with the world-renowned Briggs and Stratton Engines company to provide the power for our full range of arboricultural equipment. Bringing Euro V emissions standards, we’re proud to be able to supply the most up to date environmentally friendly petrol power with optimal fuel economy and reliability.
The Armstrong DR-SG-15 features the Briggs and Stratton 400cc XR Professional 13.5HP single cylinder petrol engine, which transmits its power to the mining-grade tungsten carbide tipped grinding wheel via a centrifugal clutch and a pair of heavy-duty rubber drive belts.
The 400cc powerplant rotates the heavy duty 304mm diameter stump grinding wheel at 3600 revs per minute, making light work of any wood with is 9 carbide tipped teeth. The stump grinding teeth have been specially designed so they can be re-sharpened several times before a replacement set is needed. This makes the machine very economical to run.
Engineered with the operator in mind, the sturdy frame has a wheelbase of only 80cm making access into most locations very easy. Large pneumatic tyres have been specified make transport of the machine to the jobsite easy. With a weight of only 110kg operation of the stump grinder is simple and straightforward. The hand brake is applied, which locks the drum brake on the left wheel, cleverly designed to allow for the machine to be arced from left to right across the stump milling it away easily by using the well-balanced weight of the machine to the operator’s advantage. The handle is fully adjustable to assist any likely arc of operation, allowing it to be adjusted to the most comfortable position for the operator depending on whether the stump is above or below ground level. The ergonomic handle can also be fully folded over to assist in storing the machine.
For operator safety, a full width chassis deflector curtain is fitted to prevent debris from being ejected from beneath the machine. All drive belts and the grinding wheel itself are also protected by guards. An essential for safe operation is the integrated “dead man’s handle” safety lever fitted to the handle. This must be permanently held for the machine to run. Without it the operators grip, the engine simply cuts out and stops operation.
Specifications:
|
Briggs and Stratton XR2100 Professional 13.5hp Euro V 4-stroke OHV petrol engine
|
|
420 cc
|
|
9 kW at 3,600 rpm
|
|
Unleaded petrol – E10 Compatible
|
|
6.5 litres
|
|
1.1L SAE 10W30 or 40
|
|
Electric Key start with pull start back up.
|
|
304.8 mm
|
|
235 mm |
|
600 mm |
|
125/110 kg
|
|
9 |
|
110 dB (A)
|
|
1060/800/590mm
|
|
2650/800/1150 mm |
*** This unit is new and unused – it will require commissioning prior to first use. The engines are preserved from the factory for transport and will require oil. The machine will require building and checking by a competent person. Please ensure all drive belts and blades are checked and adjusted as per the instructions prior to 1st use. **
November Online Auction Direct from UK Government Departments, Ex MoD, Fire & Rescue, National Contracts & Companies * NEW ITEMS ADDED DAILY *
Ends from
Venue Address
Honeypot Lane
Colsterworth
Lincolnshire
NG33 5LY
United Kingdom
For Witham Specialist Vehicles Ltd delivery information please telephone +44(0)1476 861361.
Important Information
NO WARRANTY IS OFFERED OR IMPLIED IT IS BOUGHT AS SOLD AND SEEN VIEWING IS WELCOME AND RECOMMENDED.
VAT WILL BE ADDED TO THE FINAL PRICE.
PLEASE NOTE THERE IS A 12% BUYERS PREMIUM ON ALL LOTS IN THIS AUCTION.
YOU ARE BIDDING TO BUY AND ONCE YOU HAVE PLACED YOUR BIDS AND AGREED TO THE TERMS AND CONDITIONS THEY CANNOT BE CHANGED. IF YOU DO NOT WISH TO BUY DO NOT BID.
PLEASE NOTE RESERVES CAN BE ALTERED AT ANY TIME EVEN AFTER THE AUCTION HAS ENDED
Terms: Full payment must be made within three days and removal within seven days otherwise storage charges will apply at GBP 28 per day **THERE ARE NO EXCEPTIONS**. This is a legally binding contract to purchase. If you are not sure please do not bid. We are unable to cancel your purchase after the auction closes. For further information or to view any other items at Witham MoD, contact Simon Chapple in sales on 01476 861361 / 07884493845 or email onlineauctions@mod-sales.com
NOTE:
CREDIT CARDS ARE ACCEPTED UP TO GBP 150
DEBIT CARDS ARE ACCPETED WITH 2 FORMS OF ID AND THE CARDHOLDER PRESENT
BANK TRANSFER IS ALSO ACCEPTABLE BUT THE GOODS WILL ONLY BE RELEASED WHEN WE CONFIRM PAYMENT HAS REACHED OUR ACCOUNT
WE ACCEPT CASH UP TO A MAXIMUM OF GBP 9000
Online auction from the UK MoD and other departments. Running 365 days a year 24 hours a day. New items added daily. Items include cars, vans, 4x4s, emergency services vehicles, motorbikes, trucks, trailers, Armoured personnel carriers, Vehicle Spares, Engines, Tyres, Tools and various militaria and non militaria items. All items listed at www.mod-sales.com/auction/
Please note reserves can be altered at any point up until the close of the auction
You will be notified by email the following working day if you have been successful on your item. All bids are contractually binding and cannot be retracted.
All bids are plus VAT. NO handling/loading charges.
All items are available to view by appointment only at the following site: Witham Specialist Vehicles Ltd, Honeypot Lane, Colsterworth, Lincs, NG335LY. Opening hours are 8.30am to 5.00pm Monday-Friday, Closed Sat-Sun. For further information regarding any item listed on our auction please contact Simon Chapple: Telephone: 01476 861361 / 07788610730 Email onlineauctions@mod-sales.com
Once the auction item has ended you will recieve an invoice the following working day by email. Full payment must be made within three days from the date of the invoice and removal within 7 days. All items are located at the following site: Witham Specialist Vehicles Ltd, Honeypot Lane, Colsterworth, Lincs NG33 5LY. The following payment methods are accepted: bank transfer, cash up to £9000 with I.D., debit card in person with I.D., credit card up to an amount of £150. Payments can be taken over the phone on a credit card up to £150 or debit card up to £500. Items will not be available for collection until the funds have cleared.
Please ensure you read and agree to our terms and conditions prior to placing your bid. This is a legally binding contract to purchase, if you are not sure, please do not bid. We are unable to cancel your purchase, after the auction closes. For further information or to view this or any other items at Witham MoD, contact Simon Chapple in sales, 01476 861361 / 07884493845 or email onlineauctions@mod-sales.com
Terms & Conditions
General Auction Terms & Conditions
A. General
1. All Witham Specialist Vehicles Ltd sales are governed exclusively by the following conditions and the conditions of the respective auction. Alternative agreements require confirmation by Witham Specialist Vehicles Ltd in writing.
B. The Auction Bid Procedure
1 Inspect goods thoroughly before submitting a bid. Warranty claims are excluded.
The goods are located at Witham Specialist Vehicles Ltd, Honeypot Lane, Colsterworth, Lincs, NG335LY. Please consult the website www.mod-sales.com for opening times.
2. Bids must be submitted electronically
3. VAT will be charged in addition to the bid price
4. Bids are binding and cannot be withdrawn or altered once placed.
5. Witham Specialist Vehicles Ltd reserves the right to reject any bids.
6. The highest bidder will be notifiied by invoice which will follow by email the next working day. Payment must be recieved within 3 working days from the date of the invoice and collected within 7 days from the date of the invoice.
C. Sales
1. Bids shall principally be submitted in £ sterling.
2. VAT will be charged in addition to the bid price.
D. Payment
1. Payment shall be received by Witham Specialist Vehicles Ltd within 3 days of date of Invoice without any deduction. Bank transfer, debit cards and cash with I.D. are accepted as payment only.
2. Payment is to be made in £ sterling. Banking fees and exchange differences are at the Buyer's expense.
3. Goods will not be released until all funds are cleared.
E. Delivery
1 On payment of the full invoice amount Buyer will receive a release note. In case of Intra Community Deliveries, prior to handing over the release note, the buyer has to declare in writing to deliver the goods to a member state of the Community.
2. The Buyer is obliged to collect the goods purchased within 7 days of the date of Invoice. Goods collected after this deadline will incur storage charges of £28 +VAT per lot per day charges. The item will not be released until all charges have been paid in full. This pick-up obligation is one of the Buyer's principal performance obligations. Before removal, the Buyer must make prior arrangements with the contract officer at the storage location concerned. Goods requiring an export license must be collected within 7 days from the date of the export license being granted. Goods collected after this deadline will incur storage charges of £28 +VAT per lot per day charges.
-
3. Witham Specialist Vehicles Ltd as the exporter is responsible for adherence of the customs regulations and the export licensing procedure.
4. Goods are sold ex storage location. Assistance will be given for loading unless otherwise stated,
5. The Buyer shall be liable for any loss or damage caused by himself or his agents arising out of or In any way in connection with the performance of his contractual obligations (especially during pickup of the goods) and in this context shall indemnify Witham Specialist Vehicles Ltd and its principals against all relevant third party claims including litigation costs. Unless excluded by law, the Buyer waives all rights to claim against Witham Specialist Vehicles Ltd and Its principals In respect of any loss, damage or injury suffered by him, his personnel or his agents in connection With the take-over, collection or transportation of the goods and in this respect Witham Specialist Vehicles Ltd and its principals shall also be indemnified against all claims from third parties.
6. The risk of deterioration or loss of the goods transfers to the Buyer on take-over of the goods.
7. In the event Witham Specialist Vehicles Ltd is unable to make goods available prior to the transfer of risk to the Buyer, the Buyer is entitled only to reimbursement of the invoice amount, Further claims against Witham Specialist Vehicles Ltd are excluded unless the action of Witham Specialist Vehicles Ltd can be proved as to be deliberate of grossly negligent.
F. Retention of Title
1. The title of the goods transfers to the Buyer once payment of the purchase price has been made and hand over of the goods has been completed.
G. Warranty and Liability for Defects
1. Goods are "sold as seen", excluding any warranty claims. Witham Specialist Vehicles Ltd gives no guarantee as to description, quantity, and quality. condition, suitability for use and licensing, undamaged history or the non-existence of apparent or hidden defects.
2. Remarks regarding the description, condition and assortment of the goods as well as indication of quantities in "en-bloc" lots are non-binding. Information, statements and promises are without obligation unless confirmed by Witham Specialist Vehicles Ltd in writing.
3. The Buyer shall be responsible for adherence, to safety, licensing and environmental protection requirements as well as for applying for operating permits.
4. Bidders bid at thier own risk and should inspect the vehicles thoroughly prior to bidding to satisfy themselves as to the condition of the items.
5. Bidders should ascertain through thier own inspection that the items are fit and suitable for thier intended purpose.
H. Default In Payment, Failure to Remove Goods
1. If Buyer falls to pay the full amount of the purchase price in due time, Witham Specialist Vehicles Ltd shall be entitled to charge default interest at 2% above the current Longer Term Refinancing Rate of the European Central Bank, but not less than 8% and to retain all performance ensued from all purchase agreements concluded with the Buyer.
2. If Buyer fails to remove the goods in due time, Witham Specialist Vehicles Ltd shall be entitled to charge default fees In the amount of storage fees usually Charged by freight forwarders and for to have the goods removed and to store elsewhere on account and risk of the Buyer. Witham Specialist Vehicles Ltd shall also be entitled to refuse the acceptance of buyer's further performance. To sell or dispose of the goods over the counter and to charge the Buyer with all costs and damages incurred
